Danny19 Posted January 5, 2021 Share Posted January 5, 2021 Hello I'm looking to work in Australia as a joiner but don't know where to start, I heard this was a good place. I'm 40 years old and hold an nvq lv2 in carpentry and joinery, 20 years time served. Ive heard they're looking for joiners in aus but I'm worried either my age or lv2(most joiners have a lv3) might hold me back. Aside from that I'm not sure if I apply for jobs first then get a visa or vice versa. Anyway this is my first action toward my dream so any info would be much appreciated. Quote Link to comment Share on other sites More sharing options...
cheese n pickle Posted January 5, 2021 Share Posted January 5, 2021 Hi, Carpenter is on the occupation list. TRA is the assessing body for your trade. Check out the 2 links below. Not sure if a level 2 would be sufficient. Minimum for a trade cert in Australia is a cert III. Skilled occupation list (homeaffairs.gov.au) Migration Skills Assessment | Trades Recognition Australia Quote Link to comment Share on other sites More sharing options...
Marisawright Posted January 5, 2021 Share Posted January 5, 2021 You say you're looking for work, but you sound as though you'd like to migrate to Australia permanently, is that right? If you just want to work in Australia, then you can get an employer-sponsored visa. That means finding someone who's willing to give you a job, then they apply for a 482 visa for you. However, that's only temporary for 2 to 4 years. There's a possibility that you might be able to apply to stay permanently after that, but it's far from guaranteed. I wouildn't recommend it if you have a family, as the cost to move over, and then move back after only a few years, would be horrendous. If you want to migrate, then there's no point looking for a job. You need to get a skilled visa (a 189, 190 or 491), and it takes a year or more for it to be processed. No employer is going to offer you a job, and then wait 12 months or more for you to turn up! So it will be a case of applying for the visa, waiting to see if it's granted, then heading off to Australia without a job to go to. The problem you'll face is that you don't just apply for a skilled visa, and then wait in an orderly queue until it's your turn. It's a competition, like applying for a job. It's a points system, and the people with the highest points win. You only need 65 points to be allowed to apply for a visa - however, competition is so fierce, it's not even worth applying if that's all you've got. For the 189 visa, you'll need at least 90 points to stand any chance at all. For the 190 or 491 it's a bit better, but not that much. And you don't get a refund if you're not picked! You get points for qualifications, experience and age. At 40, you'll have a lower score so that might scupper your chances. Quote Link to comment Share on other sites More sharing options...
cheese n pickle Posted January 5, 2021 Share Posted January 5, 2021 Quote Ive heard they're looking for joiners I wouldn't put too much hope on this as there are plenty of young tradies coming through TAFE (Trade and Further Education) so wouldn't say it's an occupation in high demand with no-one to fill the roles. Quote Link to comment Share on other sites More sharing options...
Jack91 Posted January 6, 2021 Share Posted January 6, 2021 2 hours ago, cheese n pickle said: I wouldn't put too much hope on this as there are plenty of young tradies coming through TAFE (Trade and Further Education) so wouldn't say it's an occupation in high demand with no-one to fill the roles. I'd disagree. I'd rather employ an older qualified Joiner over anyone from TAFE. I am struggling to find joiners as it is, not so much I'd want to sponsor anyone though 1 Quote Link to comment Share on other sites More sharing options...
Paul1Perth Posted January 6, 2021 Share Posted January 6, 2021 1 hour ago, Jack91 said: I'd disagree. I'd rather employ an older qualified Joiner over anyone from TAFE. I am struggling to find joiners as it is, not so much I'd want to sponsor anyone though Someone with 20 years experience would be way in front of a TAFE graduate. Quote Link to comment Share on other sites More sharing options...
Marisawright Posted January 6, 2021 Share Posted January 6, 2021 (edited) 1 hour ago, Jack91 said: I'd disagree. I'd rather employ an older qualified Joiner over anyone from TAFE. I am struggling to find joiners as it is, not so much I'd want to sponsor anyone though Yes, but that's going to cut no ice with Immigration. An employer wanting to sponsor a joiner to come to Australia, must prove that they can't find any local candidates to take the job. So if the OP can get a visa and get into Australia, he'll probably be fine, but he's going to have to get here on his own steam first. Edited January 6, 2021 by Marisawright Quote Link to comment Share on other sites More sharing options...
cheese n pickle Posted January 6, 2021 Share Posted January 6, 2021 3 hours ago, Jack91 said: I'd disagree. I'd rather employ an older qualified Joiner over anyone from TAFE. I am struggling to find joiners as it is, not so much I'd want to sponsor anyone though of course, that's a no-brainer! I just picked up on the fact that the poster might be thinking this is an occupation in high demand. I'm sure there are still lots of carpenters with years of experience in Australia, and as @Marisawright pointed out, employers have to find a local candidate first before sponsoring. I work in a TAFE so was just sharing that perspective. In fairness to the young, newly-qualified they've got to start somewhere, after all the OP must have been one once! 1 Quote Link to comment Share on other sites More sharing options...
VERYSTORMY Posted January 6, 2021 Share Posted January 6, 2021 Your best option is to speak to a good registered migration agent to see what options are best. Quote Link to comment Share on other sites More sharing options...
calNgary Posted January 6, 2021 Share Posted January 6, 2021 17 hours ago, Danny19 said: Hello I'm looking to work in Australia as a joiner but don't know where to start, I heard this was a good place. I'm 40 years old and hold an nvq lv2 in carpentry and joinery, 20 years time served. Ive heard they're looking for joiners in aus but I'm worried either my age or lv2(most joiners have a lv3) might hold me back. Aside from that I'm not sure if I apply for jobs first then get a visa or vice versa. Anyway this is my first action toward my dream so any info would be much appreciated. Have a word with an agent and see if you have enough points to apply for a PR visa. Not only is the visa more secure, it also gives you more freedom work wise. I know a few UK joiners who have made the move and all do fine for work, 2 now work for themselves as odd job type carpenters doing kitchen and bathroom units. Good luck with everything Cal x Quote Link to comment Share on other sites More sharing options...
Jack91 Posted January 8, 2021 Share Posted January 8, 2021 On 06/01/2021 at 13:00, Marisawright said: Yes, but that's going to cut no ice with Immigration. An employer wanting to sponsor a joiner to come to Australia, must prove that they can't find any local candidates to take the job. So if the OP can get a visa and get into Australia, he'll probably be fine, but he's going to have to get here on his own steam first. I realise that - I was just stating that it would be my preference to employ someone rather than have to train them. We have asked everyone to do overtime since last February, and it won't be stopping anytime soon. On 06/01/2021 at 15:04, cheese n pickle said: of course, that's a no-brainer! I just picked up on the fact that the poster might be thinking this is an occupation in high demand. I'm sure there are still lots of carpenters with years of experience in Australia, and as @Marisawright pointed out, employers have to find a local candidate first before sponsoring. I work in a TAFE so was just sharing that perspective. In fairness to the young, newly-qualified they've got to start somewhere, after all the OP must have been one once! It is in high demand, no doubt about that! I get everyone has to start somewhere, including myself. We employ 3 apprentices, 1 of which will hopefully stay on after he is qualified. The other two I will be happy to see the back of. Quote Link to comment Share on other sites More sharing options...
bambi Posted June 26 Share Posted June 26 I know this is an old thread and it went a bit off track due to the racist behaviour of someone... question I have for carpenters working in Australia. There are pathways to get the cert 3 carpentry which are alternatives to apprenticeship for people with years of experience. Was wondering though if these are recognised at the same level as those who have done the traditional route. As an experienced carpenter I cant see the value of going through the basics again. The rpl process seems to take care of this but I've seen snide comments from ozzie carpenters that this route "isn't worth it". Just wondering if anyone has first hand experience? Thanks Quote Link to comment Share on other sites More sharing options...
David1316 Posted June 30 Share Posted June 30 You would need to convert your certificate to a AQF 3 (I'm in a similar situation as a decorator with a NVQ 2) I don't know if the carpenter course is the same cost but DUC have told me its around $3500au you'll also need to do a skills assessment. I was looking at a 189/190 visa. I believe they are slowing down on invites especially non priority or lower points (seems they're choosing more 80/85pts upwards) but that's not to say those with 65/70pts aren't being invited because some are. Have a chat with DUC they're a trusted and seem very reputable agents in UK for Oz visas. Quote Link to comment Share on other sites More sharing options...
Nemesis Posted June 30 Share Posted June 30 On 26/06/2024 at 09:05, bambi said: I know this is an old thread and it went a bit off track due to the racist behaviour of someone... question I have for carpenters working in Australia. There are pathways to get the cert 3 carpentry which are alternatives to apprenticeship for people with years of experience. Was wondering though if these are recognised at the same level as those who have done the traditional route. As an experienced carpenter I cant see the value of going through the basics again. The rpl process seems to take care of this but I've seen snide comments from ozzie carpenters that this route "isn't worth it". Just wondering if anyone has first hand experience? Thanks I must be missing something, everyone was really helpful and I can't find anything racist? Please enlighten me! 14 hours ago, David1316 said: You would need to convert your certificate to a AQF 3 (I'm in a similar situation as a decorator with a NVQ 2) I don't know if the carpenter course is the same cost but DUC have told me its around $3500au you'll also need to do a skills assessment. I was looking at a 189/190 visa. I believe they are slowing down on invites especially non priority or lower points (seems they're choosing more 80/85pts upwards) but that's not to say those with 65/70pts aren't being invited because some are. Have a chat with DUC they're a trusted and seem very reputable agents in UK for Oz visas. The thread is from early 2021 so I suspect the OP may have moved on, though your info could be helpful for others 2 Quote Link to comment Share on other sites More sharing options...
Blue Manna Posted July 1 Share Posted July 1 12 hours ago, Nemesis said: I must be missing something, everyone was really helpful and I can't find anything racist? Please enlighten me! The thread is from early 2021 so I suspect the OP may have moved on, though your info could be helpful for others Maybe there was someone who didn't like working with dark wood? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.